Menú Cerrar

Model 802P 600 Degree Roller Oven

Shale Tech Solutions SRL distribuidor exclusivo para la Argentina

Fann roller ovens are used for aging drilling fluids or muds. The Fann line includes a portable model with a heat range that extends to 600 degrees F.

The Model 802P oven features two power-driven rollers, a digital temperature controller and a timer. The compact design of the roller oven makes it easier to install and move.

The Model 802P has a switchable power supply and will run on 115 volt alternating current or 230 volt power. Cords are available for many countries.

Temperature rangeAmbient to 600° F
Heater Power400 watts
Power Requirements115V or 230V AC
Weight90 lb (40.8 kg)
Length20.15 in (51.18 cm)
Width13.12 in (33.32 cm)
Depth18.62 in (47.29 cm)

The Model 802P Roller Oven meets the essential requirements of the IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), by using the relevant standard shown below to indicate compliance.

IEC 61010-1:2001 (Second Edition)
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements


Watch a video describing the Model 802P Roller Oven


High Temperature Aging Cell  

Only aging cells rated for 600° F should be used in the Model 802P oven.  Two aging cells may be used at one time.

The HT Aging Cell is certified per ASME Code Section VIII, Division 1.

Volume550 ml
Maximum Working Pressure2500 psi (17237 kPa)
Maximum Temperature600° F (315° C)

Ordering Information
Part No. 102030761 – Model 802P Portable 600° Roller Oven
Part No. 102111608 – High Temperature Aging Cell