Shale Tech Solutions SRL distribuidor exclusivo para la Argentina
HPHT Filter Press Cells are commonly used to test drilling fluids under high-pressure and high-temperature conditions. During this testing the possibility exists that the test fluid may solidify and plug the entrance and exit valve stems to the cell. Laboratory technicians are increasingly concerned about opening a HPHT Filter Press cell with pressure trapped inside.
Fann has developed a bench top cell clamp to maintain force on the lid while the set screws are removed. Once the screws are removed, the lid can be allowed to slowly rise and release any trapped pressure in a controlled manner.
Two height clamps are available for the different cell sizes.
Part No. 232207 – Clamp for 175ml HPHT Filter Press Cell
Part No. 232208 – Clamp for 500ml HPHT Filter Press Cell