Menú Cerrar

Wet Sieve Analysis

Wet Sieve Analysis Kit

Diseñado como un método de prueba simple, preciso y reproducible para el análisis del tamaño de partículas mediante tamizado en húmedo, como dice en la Especificación API 13A.

The complete system contains all the components required for a connection to a water source. The flow pressure regulator is rated for 125 to 200 psig inlet pressure. The outlet pressure is adjustable from 0 to 15 psig. A low pressure 3 ft hose with a spray nozzle is included. The spray nozzle has a number TG 6.5 tip with a 1/4 TT body and is attached to the hose with a 1/4 FNPT stainless steel 90 degree elbow.

This spray assembly is recommended in the API SPEC 13A. Both sieves conform to the requirements of ASTM E11 of approximate dimensions 76 mm diameter and 69 mm from top of frame to wire cloth.

Data Sheets/Parts Lists/Procedures & Manuals

Ordering Information

Part No. 206628 Wet Sieve Analysis Kit

Note: Images of products are provided for illustrative purposes only. The actual product you receive may vary from the image displayed on this web site.