Shale Tech Solutions SRL distribuidor exclusivo de FANN para la Argentina
Designed as a simple, accurate, and reproducible test method for particle size analysis by wet sieving, as specified in API Specification 13A.
The complete system contains all the components required for a connection to a water source. The flow pressure regulator is rated for 125 to 200 psig inlet pressure. The outlet pressure is adjustable from 0 to 15 psig. A low pressure 3 ft hose with a spray nozzle is included. The spray nozzle has a number TG 6.5 tip with a 1/4 TT body and is attached to the hose with a 1/4 FNPT stainless steel 90 degree elbow.
This spray assembly is recommended in the API SPEC 13A. Both sieves conform to the requirements of ASTM E11 of approximate dimensions 76 mm diameter and 69 mm from top of frame to wire cloth.
Ordering Information
Part No. 206628 Wet Sieve Analysis Kit
Note: Images of products are provided for illustrative purposes only. The actual product you receive may vary from the image displayed on this web site.