Shale Tech Solutions SRL distribuidor exclusivo para la Argentina
The Cement Curing Autoclave simulates pressure and temperature conditions for curing cement samples in accordance with API test procedures. After a specified curing time, set cement cubes are removed for crush testing for determining compressive-strength development.
An Autoclave pressure vessel is inserted into an automatic temperature-controlled heating jacket and pressurized with a hand-operated hydraulic pump. An automatic bleed-off valve mounted atop the autoclave assembly prevents excessive pressure buildup within the curing vessel. This model cures two single-cube specimens at a time in the vessel. This Autoclave is equipped with a state-of-the-art digital programmable rate set-point temperature controller.
Part No. 101497200 Cement Curing Autoclave 115 Volt, 16 Amps 50/60 Hz
Part No. 101533369 Cement Curing Autoclave 230 Volt, 8 Amps 50/60 Hz
|Pressure||3,000 psig (20.7 MPa)|
|Capacity||2 Cubes Power|
|Requirements||115/230 Volts, 16/8 amps, 50/60 Hz Power|