Shale Tech Solutions SRL distribuidor exclusivo de FANN para la Argentina
Fann roller ovens are used for aging drilling fluids or muds. The Fann line includes a portable model with a heat range that extends to 600 degrees F.
The Model 802P oven features two power-driven rollers, a digital temperature controller and a timer. The compact design of the roller oven makes it easier to install and move.
The Model 802P has a switchable power supply and will run on 115 volt alternating current or 230 volt power. Cords are available for many countries.
| Temperature range | Ambient to 600° F |
| Heater Power | 400 watts |
| Power Requirements | 115V or 230V AC |
| Weight | 90 lb (40.8 kg) |
| Length | 20.15 in (51.18 cm) |
| Width | 13.12 in (33.32 cm) |
| Depth | 18.62 in (47.29 cm) |
The Model 802P Roller Oven meets the essential requirements of the IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), by using the relevant standard shown below to indicate compliance.
IEC 61010-1:2001 (Second Edition)
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements
Watch a video describing the Model 802P Roller Oven
High Temperature Aging Cell
Only aging cells rated for 600° F should be used in the Model 802P oven. Two aging cells may be used at one time.
The HT Aging Cell is certified per ASME Code Section VIII, Division 1.
| Volume | 550 ml |
| Maximum Working Pressure | 2500 psi (17237 kPa) |
| Maximum Temperature | 600° F (315° C) |
Ordering Information
Part No. 102030761 – Model 802P Portable 600° Roller Oven
Part No. 102111608 – High Temperature Aging Cell